|
TECHNICAL
SPECIFICATIONS
Approvals
:
Bureau of Indian Standards.
CSA
International, Canada.
Standards
Confirmity
:
IS 13947 (Part 5 sec.I), 1993
Degree
of Protection
:
IP 65
Rated
Insulation voltage
:
600v
Rated
thermal current
:
10A
Contact
operation
:
Self wiping, slow break NO or NC
Make
and break capacity
As per IEC 947-5-(1) 1990
:
AC 15, 5A, 240 V AC
:
DC 13, 1.1A, 250 V DC
Terminal
marking
:
1-2 for NC, 3-4 for NO
Terminal
capacity
:
Maximum 2 X 1.5mm² or 1 X 2.5mm²
Minimum 1 X 0.5 mm²
Short circuit Protection
:
10 A cartridge fuse HRC type, rated for resistive
loading
Operating
Temperature
:
-25ºC + 70ºC
Altitude
:
<3000m
Mechanical
Life
:
Over 1 million operations.
The
Basic switches are double break and have self wiping contacts. The
basic switches are interchangeable and can be stacked without
additional hardware. 1 to 6 basic switches (NO or NC) can be used with
pushbuttons and selector switches. For illuminated switches 1 or 2
basic switches (No or NC) can be used.
The
Pilot lights and illuminated switches are suitable for direct supply
or supply through series resistor and diode, using bayonet cap
filament bulb type JLBC275, as follows
Next Page
|
